Summary for 2022.0.4

General

• Corrected an issue that caused some G02/G03 directions to be incorrect when loading PowerMill CUT files
• Added processing for start distance when loading drilling cycles from PowerMill CUT files
• Updated output for Siemens CYCLE832 output for Semi-Finishing (_ORI_SEMIFIN)
• Added additional checks and improved error reporting for cutter compensation
• Improved simulation of LBL calls in Heidenhain programs
• Added an option to start tool path auto-comment list index from 1 instead of 0
• PowerMill Plugin: Corrected problems when outputting projects on systems with decimal separators other than '.'

Summary for 2022.0.3

General

• Improved accuracy of proximity checks in certain situations
• Added an error when prefer positive/negative tilt is used on a machine that should force the tilt preference
• Corrected CYCLE800 turning output for GROB machines
• Corrected approach simulation for turning operations posted with work coordinate shifts and turning operations posted using tilted work plane coordinates
• Corrected output for left handed tapping on Okuma machines
• Corrected an issue when simulating cutter compensation
• Corrected output of feed per rev vs feed per min on Heindenhain controls
• Corrected M91 move simulation on certain tilting spindle machines
• PowerMill Plugin: Fixed a crash when exporting tools with trailing white space in their name
• Mastercam plugin: Improved support for custom tool shapes with profiles defined in negative Y
• NX plugin: Output tool offset number for all operations not just at tool changes

Summary for 2022.0.2

General

• Corrected an issue that caused some IGES Geometry to load in wrong orientation
• Updated SQLite

Summary for 2022.0.1

General

• Fixed a problem that allowed master programs to incorrectly modify positions in the sub-program
• Corrected probing machine preview positioning for bolt-on table style machines
• Fixed a problem for Haas UMC-750P machines that caused incorrect XYZ positions when DWO is active
• Fixed an lock up with the 2D graph when path data had not been regenerated
• Removed file overwrite prompt when importing resources from the configuration wizard
• Updated minimum size for the probing wizard dialog
• Corrected an issue simulating 2D Cutter Compensation for some arcs
• Added the NCI Operation ID to the operation parameters
• Added proper support for feed rates for FANUC 3D Cutter compensation G43.8
• Corrected the software version output in the exported project PDF
• Fixed a crash when importing IGES files using File Import
• Fixed a PowerMill Plugin crash when exporting tools if running in languages other than English
• Initial release of the CAMplete plugin for Mastercam 2022

Summary for 2022

General

• First release of Autodesk CAMplete TruePath 2022
• Available by subscription, no USB license required

Thank You...

We thank all our customers who identified these issues and reported them to Autodesk. These reports give us the opportunity to improve the product and provide you with the best solutions for manufacture. Autodesk also thanks you for your continued support and feedback regarding the content of this update release.

Respectfully,

Autodesk CAMplete TruePath Product Team