Thank
you for downloading Robot Structural Analysis Professional 2024.0.1 hotfix.
This
Release Notes document contains the latest
information regarding the installation and use of this hotfix. It is strongly
recommended that you read this entire document before you apply the hotfix to
your licensed copy of the product.
Contents
·
Who Should Install This Hotfix?
·
Primary
Issues Resolved by Robot Structural Analysis Professional 2024.0.1 Hotfix
·
Apply This
Hotfix to a Standalone Installation
·
Apply
This Hotfix Through a Local Network
The
Robot Structural Analysis Professional 2024.0.1 hotfix is recommended for all
users. It enhances reliability and corrects issues that you may encounter while
using the product.
This
hotfix may be applied to any licensed copy of Autodesk Robot Structural
Analysis Professional 2024 software. It is not recommended to uninstall this
hotfix as may affect some functionalities in the software. See Uninstall notice
for further information.
Primary Issues Resolved by This Hotfix
As
a result of detailed information from customers, the following were identified
and fixed:
·
Corrected program
instabilities while running analysis for a model containing steel connection
definition.
·
Corrected Degree value
input for gamma angle property for members.
·
Corrected the program
instability that occurred when selecting the Envelope results table for shells
configured for Envelope presentation for single points and using Ctrl+A to copy
to the clipboard.
·
Corrected display of the
nonlinear function name in the Supports dialog.
·
Corrected the version
name displayed in Task Manager and properties.
·
Corrected harmonic
analysis results for internal forces in members when damping is enabled in
analysis parameters.
·
Corrected spectrum
definition for seismic analysis according to Portuguese NP EN 1998-1:2010/A1
2013 design code.
·
Corrected display of
load contours by improving tolerance of contour load application to inclined
panels.
·
Corrected effect of a
redundant force displayed in global coordinate system origin when forces
generated automatically are presented in the view for a seismic analysis load
case with an equivalent lateral force method.
·
Corrected reactions for
Load Take-Down analysis in case a wall was supported by beams and nodal support
in duplicated nodes where one reaction was missing.
·
Corrected reactions for
Load Take-Down analysis in case a column was supported by a beam and a nodal
support where reaction was taken twice.
·
Corrected reactions for
Load Take-Down analysis in case an unsupported wall edge when concentrated load
should be distributed to the support and beam.
·
Corrected results for
the concentrated force in point applied on walls in Load Take-Down analysis
method.
·
Corrected transfer of
loads to walls and supports in Load Take-Down analysis.
·
Corrected the issue related to run-time error while
sending the model containing analytical openings from Revit to Robot.
·
Corrected the issue
related to run-time error while sending the model containing arc members with
loads from Revit to Robot.
·
Corrected transferring
of area loads on panels with openings from Revit to Robot.
·
Corrected the results of
transferring more than one line load with a defined path back to Revit.
Back-up Files
It is recommended that you back up all your files before you apply
this Hotfix.
Administrative Privileges
To apply this Hotfix, it is recommended to have administrative
privileges to install and uninstall products.
About Your Product
After you install the Hotfix, updated product information displays
in the About dialog box.
Reboot
After you install this Hotfix, it is recommended to reboot your
system even if not prompted.
Apply This Hotfix to a Standalone
Installation
To download and install
the hotfix on a single computer, either:
·
Download and install the hotfix using your Autodesk Account.
To install the hotfix from your
Autodesk Account, follow the instructions below.
1.
Make sure Robot
Structural Analysis Professional is not running.
2.
Sign in to your Autodesk
Account.
3.
Click the Management
tab, and then click Product Updates.
Note: Only the
most recent hotfix displays.
4.
Position the cursor on
the hotfix you want to download, and then click Download.
5.
Open the downloaded RobotStructuralAnalysisProfessional2024_HotFix1.exe
file.
OR
·
Install this hotfix directly from the Autodesk
Access.
Autodesk Access is installed by
default with Autodesk Robot Structural Analysis Professional 2024.
Update from the Autodesk Access:
1.
Launch
Autodesk Access.
2.
When
the hotfix becomes available, Autodesk Access displays it on a list of
available updates.
Note: In the
top right-hand corner of the Autodesk Access window, you can select from which
period the updates will be displayed.
3.
Click Update to install
the hotfix on your computer.
Follow
these instructions to install this hotfix on multiple computers using your
local network.
1.
Download this hotfix and
save it to any shared folder on your local network.
2.
Find the shared folder
where you saved the hotfix and double-click the EXE file.
You
can also build your deployment using your Autodesk Account at Custom Install
tab.
Windows
10/11
1.
From the Start menu
(Windows), click Settings.
2.
Click Apps.
3.
In the Apps window, in
Related Settings in the upper right corner, click Programs and Features.
4.
In the Programs and
Features window, in the left pane, click View Installed Updates.
5.
Find the appropriate
hotfix in the list of updates and click Uninstall.
We want to express our appreciation to all our customers who
identified these issues and reported them to us. Their reports gave us the
opportunity to improve the product for everyone's benefit. We also thank you
for your continued business,
and for your feedback regarding this release.
Respectfully,
The
Robot Structural Analysis Product Team
Copyright
© 2023 Autodesk, Inc.