Thank you for downloading the Autodesk^® NWC Publish Add-in for Revit^®.

This document contains information regarding the installation and use of this add-in. It is strongly recommended that you read this document before installation. For reference, you should save this document to your hard drive or print a copy.

Contents

• Who Should Install this Add-in
• Key Features of this Add-in
• General Installation Information
• Installation Instructions
  • Apply this Add-in to a Stand-Alone Installation
  • Apply this Add-in through a Local Network
  • Uninstall this Add-in

You can install this add-in for the following Autodesk products running on all supported operating systems and languages. Be sure to install the correct add-in for your software.

• Autodesk^® Revit^® 2025

Return to Top

The Autodesk^® NWC Publish Add-in for Revit^® 2025 extends the capabilities of the Navisworks NWC Export Utility, enabling customers to export multiple views from a model in a single operation.

Return to Top

As you prepare to install this add-in, keep the following in mind:

Prerequisites

Ensure that .NET 8 Desktop Runtime is installed on your system.

Ensure that NWC Export Utility is installed on your system.

Close the Application

It is required that you close Autodesk^® Revit^® 2025 before proceeding with the installation of this add-in.

Reboot

After you install, it is recommended to reboot your system even if not prompted.

Return to Top

• Apply this Add-in to a Stand-Alone Installation
• Apply this Add-in through a Local Network
• Uninstall this Add-in

Follow these instructions to install this add-in on a single computer.

1. Download the add-in and save it to any folder.
2. Close all running Autodesk applications.
3. Find the folder where you saved the add-in and double-click the executable (.msi) file.

Return to Top

Follow these instructions to install this add-in on multiple computers using your local network.

1. Download this add-in and save it to any shared folder on your local network.
2. Close all running Autodesk applications.
3. Find the shared folder where you saved the add-in, and double-click the executable (.msi) file.

Return to Top

This add-in can be uninstalled through the Program and Features section of the Microsoft® Windows® Control Panel.

Follow these instructions to uninstall this add-in on a single computer.

1. In Windows Control Panel > Program and Features, click on the Autodesk^® NWC Publish Add-in for Revit^® 2025 and choose the Uninstall option.
2. When prompted click Yes to confirm that you want to uninstall the add-in.

Return to Top

Copyright © 2025 Autodesk, Inc.